Arctic Cat DVX400 Cooler $49.95

Check out the November 2003 issue of ATV Sport Magazine. They did a test on this cooler, see page 81, and here is what they had to say, "Installing CFM's cooler was easy." "With the inline cooler installed, our temperature gun showed reductions of close to 9 degrees..."

The original 20 fin billet aluminum engine cooler. Manufactured by CFM Performance. At 5 1/2" long and 1 1/2" in diameter it is one of the largest inline coolers available on the market today. The 3/4" hose connections allow it to be adapted to almost any liquid cooled engine that uses 3/4" ID coolant hoses. We employ the perfect balance of diameter, length, fin width, fin depth, fin spacing, and grade of aluminum to cool your quad as efficiently as possible. To install, simply remove a section of your lower radiator hose and replace it with the CFM cooler. Tighten the stainless steel hose clamps which are provided to you at no additional charge and refill coolant according to factory specifications. Multiple coolers can be used on the same machine.

Arctic Cat DVX400 KFX400 Aluminum Air Box $119.95

Designed and built by CFM Performance using 5052 series aluminum for high strength, good looks and corrosion resistance.

This air box comes with a high flow lid designed to allow maximum airflow to the engine.

Simply installing this air box and rejetting your carb will add several horsepower to your quad.

With the CFM high performance air box you will no longer have to worry about the less than perfect seal on the stock filter and air box.

Absolutely no modifications are required to install this air box. It simply bolts in place in about 20 minutes.

Air box does not include the filter.

UNI part number UP-6300AST, $30

K&N part number RB-0910, $50

Arctic Cat DVX400 Front Lowering Kit $59.95

Billet aluminum front lowering kit. Bolts to the top of your lower a-arms where the stock lower shock mount is. Lower shock is now mounted to the new bracket. Only takes a few minutes to install or remove. Will lower the front 3 1/2". Also makes the front end 1 1/2" wider. Lower center of gravity for faster cornering. Can be used for any type of riding including MX.
Arctic Cat DVX400 Rear Lowering Kit $74.95

Billet aluminum rear lowering kit for a Suzuki LT-Z400, Kawasaki KFX-400 or the Arctic Cat DVX-400. Manufactured by CFM Performance from a solid block of 6061-T6 aluminum, it will lower the rear of your quad 3 1/2". Simply remove your original piece, install your existing bearings and seals in the CFM lowering kit and reinstall. Provides a lower center of gravity for faster cornering. Perfect for any type of riding, including trail riding, flat track, and drag racing. Does not interfere with the installation of the factory skid plates.


Arctic Cat DVX400 Oil Tank $129.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 20 degrees F.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Suzuki LTZ400, Kawasaki KFX400, Arctic Cat DVX400.

Our oil tank holds 10% more oil than any other aftermarket oil tank. It holds 4 more ounces than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.


Copyright © 1993-2018 CFM Performance. All Rights Reserved.
Arctic Cat DVX400 Oil Tank with Tubes $149.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Our own original design.

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 30 degrees F. ( Our standard oil tank with no tubes produces a temperature drop of 20 degrees F. )

Allows air to flow through the oil tank to help cool the engine.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with
confidence.

Will fit any year Suzuki LTZ400, Kawasaki KFX400, Arctic Cat DVX400.

Our oil tank holds 10% more oil than any other aftermarket oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.

This oil tank uses your stock lines, drain plug, dip stick and mounting hardware. No extra items to buy. No modifications required.

Comes with a bracket to swing the bottom of the radiator away from the tank. This is necessary on some models to increase oil tank clearance.


DVX400