Polaris Outlaw 500 Scoop Kit $39.95

New set of CFM Performance radiator shrouds for the Polaris Outlaw and Predator 500.

Made only from the highest quality materials, including 0.083" thick 5052 series aluminum, and stainless steel hardware.

No modifications are necessary to install it on your Predator. To install it on your Outlaw, you will need to cut the stock plastic scoop kit off.

Our shroud design will increase air flow by over 30% to your radiator. We have seen a decrease in operating temperature of 6-8 degrees just by installing this kit.

Polaris Outlaw 500 Exhaust Tip $29.95


New CFM Performance aluminum high flow exhaust tip for the Polaris Outlaw 500, and the Predator 500.

It comes with a stainless steel spark arrestor screen. The inside diameter of the most restrictive part of your stock exhaust system, your stock exhaust tip, is only 1 1/4". Our high performance aluminum tip has an inside diameter of 2 ". That's an increase of 65% in open area. No jetting change is required, but to take full advantage of the CFM Performance high flow exhaust tip you can increase your main jet size. On our otherwise stock Polaris we went from a 150 to a 155 main jet after installing this tip. Some aftermarket silencers don't even require a jetting change. More power, better sound, hundreds of dollars cheaper than an aftermarket silencer, the CFM Performance high flow exhaust tip.


Polaris Outlaw 500 Air Box $119.95

All CFM Performance items are proudly 100% made in the USA.

New aluminum airbox for a Polaris Outlaw 500.

Made by CFM Performance.

Will fit any year.

Installing this airbox and re-jetting your carb will give you a 3-5 hp increase.

If you leave the lid on, no re-jetting is required.

The stock air filter has a restrictive 3" I.D.  Our air box uses a 4" I.D. filter.  It also has 30% more dirt holding capacity. This means that you will get more life out of each air filter that you buy.

Mounting brackets are made from extruded 1/8" thick 6061 aluminum for high strength.

The air box is made from 5052 series aluminum for high strength, and excellent corrosion resistance.

Does not come with a filter. Uses UNI part number NU-4102ST, $30 and K&N part number HA-4250, $60. 

These air filters allows for 50% more airflow than any air filter available for the stock air box.


Polaris Outlaw 500 Cooler $49.95

Check out the November 2003 issue of ATV Sport Magazine. They did a test on this cooler, see page 81, and here is what they had to say, "Installing CFM's cooler was easy." "With the inline cooler installed, our temperature gun showed reductions of close to 9 degrees..."

The original 20 fin billet aluminum engine cooler. Manufactured by CFM Performance. At 5 1/2" long and 1 1/2" in diameter it is one of the largest inline coolers available on the market today. The 3/4" hose connections allow it to be adapted to almost any liquid cooled engine that uses 3/4" ID coolant hoses. We employ the perfect balance of diameter, length, fin width, fin depth, fin spacing, and grade of aluminum to cool your quad as efficiently as possible. To install, simply remove a section of your lower radiator hose and replace it with the CFM cooler. Tighten the stainless steel hose clamps which are provided to you at no additional charge and refill coolant according to factory specifications. Multiple coolers can be used on the same machine.

Polaris Outlaw 500 Oil Tank $129.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 20 degrees F.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Polaris Outlaw 500.

The most efficient way to cool the oil on your Polaris is by increasing the oil capacity. Our oil tank holds 10% more oil than any other aftermarket oil tank. It holds 1.25 more quarts than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.
Copyright © 1993-2019 CFM Performance. All Rights Reserved.
Polaris Outlaw 500 Aluminum Oil Tank Oil Cooler With Tubes $149.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Our own original design.

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 30 degrees F. ( Our standard oil tank with no tubes produces a temperature drop of 20 degrees F. )

Allows air to flow through the oil tank to help cool the engine.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Polaris Outlaw 500.

The most efficient way to cool the oil in your Polaris is by increasing the oil capacity. Our oil tank holds 10% more oil than any other aftermarket oil tank. It holds 1.25 more quarts than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.

This oil tank uses your stock lines, drain plug and mounting hardware. No extra items to buy. No modifications required.

Comes with a new dip stick.