Polaris Predator 500 Air Box $189.95

All CFM Perfomance products are proudly MADE IN USA.

Guaranteed to be the most powerful air box or intake, both on the dyno and on the track, that you can buy for your Predator 500, or your money back.

New CFM Performance high flow air box for any year Polaris Predator 500.

It comes with a lid and everything you need to install it.

With the lid in place and stock jetting you will see a 3-5 horsepower increase as well as better throttle response and torque.

If the lid is not required for your riding conditions, you can remove it and rejet for even greater horsepower gains.

Our high velocity air box uses two 2 1/2" x 5" clamp on filters for maximum dirt holding capacity and air flow.

Does not come with any filters.

You don't have to wonder if your filter is seated properly with this air box.

This air box uses a pair of clamp on filters for a perfect seal every time. 

Uses UNI filters, part number UP-5245, $60 for the pair and K&N filters, part number RD-0700, $120 for the pair.

Your stock air box has the crank case breather hose attached to it. This air box allows for so much air flow that the crank case breather hose can not be attached to the air box because it can actually suck oil out of your crank case and into the air box. We leave the breather hose open and tie it to the frame in the highest location it will reach. We have run our ATV's with an open breather hose for many years, in all riding conditions with no problems. The crank case maintains positive pressure on the hose making it virtually impossible for anything to get in. The open crank case breather hose has been standard on many ATV's for years. If you would like more protection, you can add a crank case breather filter to the hose.



Polaris Predator 500 Cooler $49.95

Check out the November 2003 issue of ATV Sport Magazine. They did a test on this cooler, see page 81, and here is what they had to say, "Installing CFM's cooler was easy." "With the inline cooler installed, our temperature gun showed reductions of close to 9 degrees..."

The original 20 fin billet aluminum engine cooler. Manufactured by CFM Performance. At 5 1/2" long and 1 1/2" in diameter it is one of the largest inline coolers available on the market today. The 3/4" hose connections allow it to be adapted to almost any liquid cooled engine that uses 3/4" ID coolant hoses. We employ the perfect balance of diameter, length, fin width, fin depth, fin spacing, and grade of aluminum to cool your quad as efficiently as possible. To install, simply remove a section of your lower radiator hose and replace it with the CFM cooler. Tighten the stainless steel hose clamps which are provided to you at no additional charge and refill coolant according to factory specifications. Multiple coolers can be used on the same machine.

Polaris Predator 500 High Flow Exhaust Tip $29.95


New CFM Performance aluminum high flow exhaust tip for the Polaris Outlaw 500, and the Predator 500.

It comes with a stainless steel spark arrestor screen. The inside diameter of the most restrictive part of your stock exhaust system, your stock exhaust tip, is only 1 1/4". Our high performance aluminum tip has an inside diameter of 2 ". That's an increase of 65% in open area. No jetting change is required, but to take full advantage of the CFM Performance high flow exhaust tip you can increase your main jet size. On our otherwise stock Polaris we went from a 150 to a 155 main jet after installing this tip. Some aftermarket silencers don't even require a jetting change. More power, better sound, hundreds of dollars cheaper than an aftermarket silencer, the CFM Performance high flow exhaust tip.


Polaris Predator 500 Oil Tank $129.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 20 degrees F.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Polaris Predator 500.

The most efficient way to cool the oil on your Predator is by increasing the oil capacity. Our oil tank holds 10% more oil than any other aftermarket oil tank. It holds 1.25 more quarts than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.


Polaris Predator 500 Scoop Kit $39.95

New set of CFM Performance radiator shrouds for the Polaris Outlaw and Predator 500.

Made only from the highest quality materials, including 0.083" thick 5052 series aluminum, and stainless steel hardware.

No modifications are necessary to install it on your Predator. To install it on your Outlaw, you will need to cut the stock plastic scoop kit off.

Our shroud design will increase air flow by over 30% to your radiator. We have seen a decrease in operating temperature of 6-8 degrees just by installing this kit.

Copyright © 1993-2019 CFM Performance. All Rights Reserved.
Polaris Predator 500 Aluminum Oil Tank With Tubes $149.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Our own original design.

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 30 degrees F. ( Our standard oil tank with no tubes produces a temperature drop of 20 degrees F. )

Allows air to flow through the oil tank to help cool the engine.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Polaris Predator 500.

Our oil tank holds 10% more oil than any other aftermarket oil tank. It holds 1 more quart than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.

This oil tank uses your stock lines, drain plug and mounting hardware. No extra items to buy. No modifications are required.

Comes with a new dip stick.