Yamaha Raptor 660 Front Lowering Kit $59.95

Don't be fooled by cheap imitations!!! CFM Performance is the original manufacturer of this style lowering kit. The only lowering kit strong enough for MX use.

How do you know when other lowering kits are cheap? They will tell you in the item description, "not for jumping."

We have been selling hundreds of these every year for the last 10 years with zero broken and zero returned, even after several years of MX use.

Others say, "not for jumping".  We say,  jump all you want, as long as you have a CFM lowering kit.

New billet aluminum front lowering kit for the Yamaha ATV's listed in the description. Manufactured by CFM Performance.

Bolts to the top of your lower a-arms where the stock lower shock mount is. Lower shock is now mounted to the new bracket. Only takes a few minutes to install or remove. Will lower the front of your Yamaha about 4". Also makes the front end 2" wider. Lower center of gravity for faster cornering. 

Will fit any year Banshee, Blaster, Warrior, Raptor 350 and Raptor 660.
 
Yamaha Raptor 660 Rear Lowering Kit Fixed $39.95 or Adjustable $84.95

Don't be fooled by cheap imitations. The original and best. The only lowering kit good enough for MX use. This lowering kit is guaranteed to be both the strongest and lightest weight that you can buy, or your money back!!! 

New billet aluminum rear lowering kit for a Yamaha Raptor 350 and 660. Manufactured by CFM Performance.

Perfect for motocross, trail riding, flat track, or drag racing. Our lowering kit is stronger than the stock link that it replaces. It is perfect for any type of riding. This kit replaces the stock strut that runs parallel to the swing arm. If you want an adjustable rear lowering kit that will allow you to adjust the rear of your Raptor from stock to 4" lower. If you choose the fixed rear lowering kit you will need to use the bushings that are in your stock rear strut. The fixed lowering kit does not use the stock dust caps. If you choose the adjustable rear lowering kit, you will need to use your stock bushings and dust caps.
Yamaha Raptor 660 Oil Tank $129.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 20 degrees F.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Yamaha Raptor 660.

The most efficient way to cool the oil on your Raptor is by increasing the oil capacity. Our oil tank holds 10% more oil than any other aftermarket oil tank. It holds 1.25 more quarts than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.
Yamaha Raptor 660 Aluminum Air Box $119.95

All CFM Performance products are proudly MADE IN USA.

NEW aluminum airbox for a Yamaha Raptor 660.

Made by CFM Performance.

Will fit any year.

Guaranteed to make more power than any other air box, intake, or air box eliminator or your money back.

Installing this airbox and re-jetting your carbs will give you a 3-5 hp increase.

If you leave the lid on, no re-jetting is required.

We can help you with jetting specifications if necessary.

Get rid of that difficult to install stock airfilter.

Protect your engine with our easy to install high flow airbox and filter.

Does not come with a filter. Uses UNI part number NU-4102ST, $30 and K&N part number HA-4250, $60.

This air filter allows for 50% more airflow than any air filter available for the stock airbox, or any aluminum bolt on flange.

Your stock air box has the crank case breather hose attached to it. This air box allows for so much air flow that the crank case breather hose can not be attached to the air box because it can actually suck oil out of your crank case and into the air box. We leave the breather hose open and tie it to the frame in the highest location it will reach. We have run our ATV's with an open breather hose for many years, in all riding conditions with no problems. The crank case maintains positive pressure on the hose making it virtually impossible for anything to get in. The open crank case breather hose has been standard on many ATV's for years. If you would like more protection, you can add a crank case breather filter to the hose.
Yamaha Raptor 660 Cooler $49.95

Check out the November 2003 issue of ATV Sport Magazine. They did a test on this cooler, see page 81, and here is what they had to say, "Installing CFM's cooler was easy." "With the inline cooler installed, our temperature gun showed reductions of close to 9 degrees..."

The original 20 fin billet aluminum engine cooler. Manufactured by CFM Performance. At 5 1/2" long and 1 1/2" in diameter it is one of the largest inline coolers available on the market today. The 3/4" hose connections allow it to be adapted to almost any liquid cooled engine that uses 3/4" ID coolant hoses. We employ the perfect balance of diameter, length, fin width, fin depth, fin spacing, and grade of aluminum to cool your quad as efficiently as possible. To install, simply remove a section of your lower radiator hose and replace it with the CFM cooler. Tighten the stainless steel hose clamps which are provided to you at no additional charge and refill coolant according to factory specifications. Multiple coolers can be used on the same machine.

Yamaha Raptor 660 High Flow Exhaust Tip $39.95

The most restrictive part of your stock exhaust system is the 3/4" diameter hole in the exhaust tip. With your stock tip, the exhaust is forced to make a 90 degree turn through the spark arrestor and another 90 degree turn to come out the tip. With the CFM Performance high flow exhaust tip there are no restrictive 90 degree turns. The exhaust comes straight through an opening that is 30% larger than stock, and straight through a stainless steel spark arrestor screen. It bolts on in a few minutes with no modifications to your stock silencer, and it sounds great with out being too loud. This high performance exhaust tip makes a big difference in throttle response and top end horsepower.
Copyright © 1993-2019 CFM Performance. All Rights Reserved.
Raptor 660 660R Aluminum Oil Tank With Tubes  $179.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Our own original design.

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 40 degrees F. ( Our standard oil tank with no tubes produces a temperature drop of 20 degrees F. )

Allows air to flow through the oil tank to cool the engine.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Yamaha Raptor 660.

This oil tank holds about 1 more quart than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.

This oil tank uses all of your stock lines, drain plug, dip stick and mounting hardware. No extra items to buy. No modifications are required.