Yamaha Raptor 700 Cooler $49.95

Check out the November 2003 issue of ATV Sport Magazine. They did a test on this cooler, see page 81, and here is what they had to say, "Installing CFM's cooler was easy." "With the inline cooler installed, our temperature gun showed reductions of close to 9 degrees..."

The original 20 fin billet aluminum engine cooler. Manufactured by CFM Performance. At 5 1/2" long and 1 1/2" in diameter it is one of the largest inline coolers available on the market today. The 3/4" hose connections allow it to be adapted to almost any liquid cooled engine that uses 3/4" ID coolant hoses. We employ the perfect balance of diameter, length, fin width, fin depth, fin spacing, and grade of aluminum to cool your quad as efficiently as possible. To install, simply remove a section of your lower radiator hose and replace it with the CFM cooler. Tighten the stainless steel hose clamps which are provided to you at no additional charge and refill coolant according to factory specifications. Multiple coolers can be used on the same machine.
Yamaha Raptor 700 High Flow Exhaust Tip $39.95

All CFM Performance products are proudly MADE IN USA.

New billet aluminum, high flow exhaust tip for a Yamaha Raptor 350, Raptor 660, Raptor 700, Warrior, 1995-2005 Wolverine, and YFZ450.

The most restrictive part of your stock exhaust system is the 3/4" diameter hole in the exhaust tip. With your stock tip, the exhaust is forced to make a 90 degree turn through the spark arrestor and another 90 degree turn to come out the tip. With the CFM Performance high flow exhaust tip there are no restrictive 90 degree turns. The exhaust comes straight through an opening that is 30% larger than stock, and straight through a stainless steel spark arrestor screen.

It bolts on in a few minutes with no modifications to your stock silencer, and it sounds great with out being too loud. This high performance exhaust tip makes a big difference in throttle response and top end horsepower. If you have a Raptor 700, no jetting change is required, your fuel injection system will automatically compensate for it. If you have any other ATV listed no jetting change is required, but you may want to increase your main jet to take full advantage of your increase in exhaust flow.


Yamaha Raptor 700 Rear Lowering Kit. Fixed Rear $39.95 or Adjustable Rear $84.95

Don't be fooled by cheap imitations. This is the original and best. The only lowering kit strong enough for MX use. This lowering kit is guaranteed to be both the strongest and lightest weight that you can buy, or your money back!!! 

New billet aluminum rear lowering kit for a Yamaha Raptor 700. Made by CFM Performance.

Perfect for motocross, trail riding, flat track, or drag racing. Our lowering kit is stronger than the stock link that it replaces. It is perfect for any type of riding. This kit replaces the stock strut that runs parallel to the swing arm. If you want an adjustable rear lowering kit that will allow you to adjust the rear of your Raptor from stock to 4" lower. If you choose the fixed rear lowering kit you will need to use the bushings that are in your stock rear strut. The fixed lowering kit does not use the stock dust caps. If you choose the adjustable rear lowering kit, you will need to use your stock bushings and dust caps.

Raptor 700 Air Box $119.95

All CFM Performance products are proudly MADE IN USA.

Guaranteed to be the most powerful air box/ intake, both on the dyno and on the track, that you can buy for your Raptor 700, or your money back.

NEW aluminum airbox for a Yamaha Raptor 700.

Made by CFM Performance.

Will fit any year.

It is made from 5052 aluminum for high strength, light weight, and incredible corrosion resistance. Brackets are 7075 series aluminum, the strongest aluminum alloy ever made. Hardware is stainless steel.

The CFM high flow air box uses a high volume, high velocity plenum to increase horsepower, and throttle response, as well as top speed.

The inside diameter of your stock filter is only 2 1/2". We go all the way up to a 4" inside diameter.

In our testing, the Raptor was 4mph faster in 0-250 ft runs after installing this air box. It was also faster by 3mph in top speed.

This air box does not come with a filter. Your small, restrictive stock air filter will no longer work. You will need to purchase a UNI filter part number NU-4102ST, $30 or K&N filter part number HA-4250, $60.

Yamaha Raptor 700 Coolant Bottle Guard $29.95

New aluminum coolant bottle guard for a Yamaha Raptor 700.

Made by CFM Performance from 5052 aluminum for high strength, light weight, and superior corrosion resistance. Protects your coolant bottle from being destroyed by debris. Features a slotted sight window that still allows you to keep an eye on coolant level.


Yamaha Raptor 700 Scoop Kit $44.95

All CFM Performance products are proudly MADE IN USA.

New aluminum scoop kit for a Yamaha Raptor 700. Will fit any year. Made from 5052 series aluminum for high strength, light weight, and excellent corrosion resistance. This scoop kit bolts to the under side of your front fenders using the stock fender mounting bolts. It can be installed in less than three minutes. It will direct more air to your engine and exhaust header to help keep your Raptor running cooler


Yamaha Raptor 700 Oil Tank $129.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!!

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 20 degrees F.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Yamaha Raptor 700.

The most efficient way to cool the oil on your Raptor is by increasing the oil capacity. Our oil tank holds 10% more oil than any other aftermarket oil tank. It holds 1.25 more quarts than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.

Copyright © 1993-2019 CFM Performance. All Rights Reserved.
Yamaha Raptor 700 700R Oil Tank With Added Cooling Tubes $149.95

All CFM Performance items are proudly 100% made in the USA.

This oil tank is guaranteed to be the highest quality that you can get anywhere, at any price, or your money back!!! Our own original design.

Made 100% from american made raw materials, not cheap imported aluminum that is likely to fail from heat and vibration.

You can expect to see a temperature drop of 30 degrees F. (Our standard oil tank with no tubes produces a temperature drop of 20 degrees F.)

Allows additional air flow through the tank to the engine.

The only oil tank that will fit with any exhaust system.

The only oil tank that will work with any nerf bars.

Lifetime guarantee against leaks and broken drain fittings.

Broken drain fittings and leaks are common problems on cheap aftermarket oil tanks.

If you ever break a CFM tank, send it back and CFM will replace or repair it for FREE.

A leaking oil tank can ruin your riding trip and destroy your engine.

CFM Performance has been a leader in the aftermarket ATV business since 1993 so you can buy with confidence.

Will fit any year Yamaha Raptor 700.

This oil tank holds 1 more quart than your stock oil tank.

Features precision machined fittings. Take a close look at the poor quality fittings on cheap tanks before you consider buying one.

Expertly TIG welded in a fixture for a professional finish, perfect fit, and a tank that will never fail. Take a good look at the poor quality welds on cheap tanks before you consider buying one.

We pressure test each oil tank at 5 times the pressure it will see in operation.

Built with 5052 series aluminum for high strength and corrosion resistance.

Brackets are 7075 series aluminum. The strongest aluminum alloy ever made.

This oil tank uses your stock lines, drain plug, dip stick and mounting hardware. No extra items to buy. No modifications required.